It is highly recommended that you read these files as they contain information about new features, program corrections, known problems and various information issued after release of the user guides.
Designed by: T. Badia
Contents:
1. Overview
This file contains the description of all related to the releases of the Firmware.
The firmware is compatible with the following units:
• EcuPlus TC-I Easy & TC-I Easy K
Date : 27.03.2020
Release: 1.4
Features:
- Increased filtering of the rpm value
- Increased robustness of the activation logic of the timing correction
- In the case of a request to reset the last peaks, the reset of the time of the previous Run has been added
- Fixed bug related to the calculation of the time spent in all modes
- Increased robustness of the rpm interrupt control
- Modified algorithm for calculating the temperature K
Release: 1.3
Note: not released
Date : 31.12.2018
Release: 1.2
Features:
- Implementation of the correction coefficient of the measured and adjustable temperature by means of the EcuPlus Manager
- The calculation of the thermocouple temperature is now performed by the EcuPlus Manager Tool based on the value sent by the Ecu
- Eliminated the double table in memory containing the settings of the flywheels in use. Now the table in use is the first for all flywheels and it is therefore possible to configure the ECU for a maximum number of flywheels depending on the EcuPlus Manager Tool only.
Date : 1.08.2018
Release: 1.1
Features:
- Implementation of the filter on acquisition of the maximum speed reached (weighted average)
- Implementation of the Firmware reprogramming with Boot resident in Flash
Date : 7.06.2016
Release: 1.0
Note : First release
Copyright 2014-2021 EcuPlus. All rights reserved.